Japan Updates Radio Interference Rules for Microwave Ovens and Industrial Heaters

by admin
Japan Updates Radio Interference Rules for Microwave Ovens and Industrial Heaters

Japan has issued updated Committee on Technical Barriers to Trade notifications addressing equipment utilizing high frequency current through formal WTO notification procedures.

Japan has rewritten its radio interference rules for equipment that uses high frequency current, such as microwave ovens, industrial heaters and medical devices. The changes took effect on 2 November 2026, with grace periods of one to five years for some products.

Japan’s Ministry of Internal Affairs and Communications (MIC), which oversees radio and telecoms, told World Trade Organization (WTO) members about the plan on 28 November 20251. The rules align Japanese limits with CISPR 11, the international standard for interference from industrial, scientific and medical (ISM) equipment2. The ministry’s outline of the amendments sets 2 November 2026 as the start date3.

At a glanceDetails
What was publishedAmended ministerial ordinances and public notices under the Radio Act
Published on28 November 2025 (WTO notification)
Who must complyMakers and importers of microwave ovens, industrial heaters, medical and laboratory equipment
Effective date2 November 2026
Next milestoneFive-year grace period for some limits on ultrasonic devices and microwave ovens

What is high frequency equipment, and why does it matter?

The Radio Act covers "Equipment Utilizing High Frequency Current" in its Article 1001. These machines use radio-frequency energy for heating, cutting or imaging, not for communication. They can leak signals that disturb radio services.

The WTO notice lists the products affected. They include industrial heating equipment, microwave ovens and radio knives, which are surgical cutting tools1. It also names magnetic resonance imaging (MRI) scanners, induction heating furnaces and ultrasonic baths1.

The latest edition of CISPR 11 was issued in February 20242. Japan’s existing rules carried national differences from that standard. The amendments aim to narrow that gap2.

The ministry’s new rules

The package amends three sets of rules. These are the Ordinance for Enforcement of the Radio Act, the Regulation for Radio Equipment, and the ministry’s public notices2. The Radio Act itself is Act No. 131 of May 2, 19501.

The ministry’s outline says the changes follow a report from its Information and Communications Council on 8 December 20253. That report covered CISPR 11 and four parts of the CISPR 16 series on measuring equipment3.

AreaWhat the rules do
Equipment categoriesMerge three categories into one group3
Technical limitsReflect the latest CISPR 11 edition2
Type designationAdd laboratory measuring equipment3
LabelingAllow the mark in manuals or on screens3
Measurement methodsNew public notice on how to test interference3

What changes for manufacturers and importers

Japan used to sort this equipment into three separate categories. These were medical equipment, industrial heating equipment and "various equipment"3. The new rules merge them into one group of non-communication equipment3.

The rules, before and after 2 November 2026

QuestionBeforeFrom 2 November 2026
Equipment categoriesThree: medical, industrial heating, variousOne non-communication group
Where the mark goesOn the equipmentAlso in manuals or on screens
Laboratory measuring equipmentNot eligible for type designationEligible for type designation

Technical limits also change. The rules add interference limits for wired communication ports on ultrasonic devices and microwave ovens3. They also add radiated tests in a fully shielded, echo-free test room, and new measurement types above 1 gigahertz (GHz)3.

The definition of ISM frequencies also changes. These are the frequency bands where equipment is exempt from the limits3. The rules now point to a ministry notice instead of the international Radio Regulations, which the ministry called unclear3.

Wider type designation and easier labeling

Type designation is a product-type approval. It lets a maker or importer certify a model once, instead of seeking permits for each unit. The amendments expand it to all small and medium-sized equipment that can be measured in a laboratory2.

Type designation at a glance

DimensionProvision
ScopeSmall and medium-sized equipment measurable in a laboratory
ConditionMeets CISPR 11 limits
LabelingMark allowed in instruction manuals or on device screens

The ministry said such equipment is unlikely to disturb radio communications if it meets CISPR 11 limits3. Laboratory measuring equipment is now eligible for type designation for that reason3.

Labeling rules are also eased after requests for deregulation. The type designation mark may now go in enclosed documents, such as an instruction manual3. It may also appear on the screen of a device that has the equipment built in3.

Transition timeline and key deadlines

Japan first planned adoption in March 2026 and entry into force in April 20261. The WTO comment period closed on 27 January 20261. The ministry’s outline now sets entry into force on 2 November 20263.

Key dateWhat happens
28 November 2025Japan notifies the WTO1
8 December 2025Council report on CISPR standards3
27 January 2026WTO comment period closes1
2 November 2026Amended rules take effect3

Some products get extra time. Ultrasonic devices and microwave ovens have a five-year grace period for the new limits3. A one-year grace period applies to the new measurement methods3.

Key terms in plain words

TermMeaning
High frequency equipmentMachines that use radio energy for heating or imaging, not communication
CISPR 11International standard on interference limits for industrial, scientific and medical equipment
ISM equipmentIndustrial, scientific and medical machines that emit radio energy
Type designationApproval of a product model, so each unit needs no separate permit
Grace periodExtra time before a new rule applies to existing products
WTO notificationA formal notice telling trade partners about a planned technical rule

The next milestone is the end of the one-year grace period for the new measurement methods, counted from 2 November 20263.

Sources

  1. ↩ NOTIFICATION https://www.bangladeshtradeportal.gov.bd/kcfinder/upload/files/Announcement_1764483628.pdf
  2. ↩ 25_08153_00_e.pdf https://members.wto.org/crnattachments/2025/TBT/JPN/25_08153_00_e.pdf
  3. ↩ 001098894.pdf https://www.soumu.go.jp/main_content/001098894.pdf

You may also like