The FCC will only recognize device test labs in the US or reciprocal countries. The transition ends Dec. 1, 2028.
The Federal Communications Commission (FCC) will only recognize device testing labs in the United States or in countries that recognize U.S. labs in return. From Dec. 1, 2028, all FCC testing, certification and accreditation work must happen in those places.
The FCC adopted the final rules on Oct. 29, 2026, in its Third Report and Order, numbered FCC 26-731. The rules reach test labs, the private bodies that approve devices, and the bodies that accredit labs, along with the manufacturers that rely on them2. An accompanying proposal seeks comment for 30 days after it appears in the Federal Register, which publishes official U.S. rules2.
| At a glance | Details |
|---|---|
| What was published | Final rules (Third Report and Order) plus a new proposal for comment |
| Published on | 29 October 2026 (adopted), 30 October 2026 (released) |
| Who must comply | Test labs, certification bodies, lab accreditation bodies and device makers |
| Effective date | Transition ends 1 December 2028 |
| Next milestone | Comments due 30 days after Federal Register publication, replies after 60 days |
What is device testing, and why does it matter?
Before any electronic device can be used or marketed in the U.S., it must be tested at an FCC-recognized lab1. This covers radio-emitting products such as smartphones, computers, smart home gadgets and wearable technology2. The labs measure whether a device stays within its radio bands and safe exposure limits2.
Demand for this approval has grown fast. The FCC received about 9,400 applications in 2007 and 46,900 in 2025, roughly a five-fold increase2. Faulty testing can let devices cause interference with 911 calls, aviation, medical devices and emergency alerts, the order says2.
The FCC’s new location rules
The order limits FCC recognition of test labs to those in the U.S. or Reciprocal Economies2. A Reciprocal Economy is one with a mutual recognition agreement or a similar reciprocal deal with the United States2. Such agreements let each side accept the other’s testing and approval work.
The same limits apply to Telecommunications Certification Bodies (TCBs), the private bodies that review test results and grant device approvals3. They also apply to laboratory accreditation bodies, which check whether a lab is competent to do FCC testing2. All the substantive testing, approval and accreditation work behind a device approval must take place in those approved locations3.
| Who is covered | What the order requires |
|---|---|
| Test labs | Must be located in the U.S. or a Reciprocal Economy2 |
| Certification bodies (TCBs) | Must not be located in a non-Reciprocal Economy3 |
| Lab accreditation bodies | Must not be located in a non-Reciprocal Economy3 |
| Testing and approval work | Must take place in the U.S. or a Reciprocal Economy3 |
Why the FCC is acting now
The FCC says it lacks confidence in testing done where the U.S. has no direct authority and no government-to-government oversight deal2. It also says testing has become concentrated in a single non-reciprocal economy2. That economy does not give U.S. labs comparable market access, according to the order2.
The agency frames reciprocity as basic fairness in trade and as protection for U.S. industry1. Test labs also get early access to devices and sensitive technical data before products reach the U.S. market2.
What changes for manufacturers and labs
Device makers that now use labs in non-reciprocal economies will need to move that work. The order sets a single transition ending Dec. 1, 20282. The FCC says this gives manufacturers two years to find other labs and gives eligible labs time to expand3.
The change does not disturb existing equipment approvals, according to the order2. Today, 23 of the 39 FCC-recognized TCBs are in the U.S., and the other 16 sit in seven partner countries2.
How this builds on earlier FCC action
The new rules follow last year’s "Bad Labs" rules, which barred labs owned or controlled by national security threats such as foreign adversaries1. Those rules led to 29 test labs losing FCC recognition1. The FCC has also withdrawn recognition from two labs in non-reciprocal economies that copied and pasted test results1.
The new proposal seeks comment on more integrity measures2. These include Legal Entity Identifiers, which are standard company ID codes, and ownership by non-reciprocal economies2. It also covers checks on products after sale, protection of intellectual property and updates to the FCC’s approval system2.
| Key date | What happens |
|---|---|
| 29 October 2026 | FCC adopts the final rules and new proposal1 |
| 30 October 2026 | FCC releases the order text2 |
| 30 days after Federal Register publication | Comments due on the new proposal2 |
| 60 days after Federal Register publication | Reply comments due2 |
| 1 December 2028 | Transition ends for test labs2 |
Key terms in plain words
| Term | Meaning |
|---|---|
| FCC | Federal Communications Commission, the U.S. regulator for radio and communications devices |
| Test lab | A private lab that measures whether a device meets FCC technical rules |
| TCB | Telecommunications Certification Body, a private body that grants device approvals |
| Reciprocal Economy | A place with a mutual recognition deal with the U.S. on testing |
| Equipment authorization | The FCC approval a device needs before it can be sold or imported |
| Accreditation body | An organization that checks whether a lab is competent |
The transition for test labs ends on Dec. 1, 20282.
Sources
- ↩ DOC-426300A1.pdf https://docs.fcc.gov/public/attachments/DOC-426300A1.pdf
- ↩ FCC-26-73A1.pdf https://docs.fcc.gov/public/attachments/FCC-26-73A1.pdf
- ↩ October 2026 Open Commission Meeting | Federal Communications Commission https://www.fcc.gov/October2026