European Union Proposes Faster, Free Harmonised Standards to Replace 2012 Regulation

by admin
European Union Proposes Faster, Free Harmonised Standards to Replace 2012 Regulation

European Union: the Commission proposed on Oct. 5, 2026 a new Standardisation Regulation to cut standards development from six to four years and make harmonised standards free, pending adoption by Parliament and Council.

The European Commission proposed on Oct. 5, 2026 to speed up the EU standards that firms in batteries, construction and cybersecurity use to prove compliance1.

The new Standardisation Regulation, proposal COM(2026) 780 dated Oct. 6, 2026, would repeal Regulation (EU) No 1025/2012, the current law on European standardisation2. It takes effect only after the European Parliament and the Council of the EU adopt it1.

In short, Brussels wants standards that firms use to prove their products meet EU law to arrive in about four years instead of six. It also wants those standards to be free to read, and wants smaller companies to have a bigger say in writing them.

Why does the Commission want faster EU standards?

Harmonised standards are technical documents that turn EU legal requirements into one practical set of specifications. Once they are cited in the Official Journal of the European Union, products that follow them get a "presumption of conformity", meaning they are treated as meeting EU law3. For businesses, they are the easiest route to selling across the Single Market.

Average time to develop an EU standard, years

9+ years Before the 2012 law
6 years Today
4 years Commission target

The problem is speed. An evaluation of the current law found that developing a harmonised standard still takes six years on average, and often misses legislative deadlines2. That is faster than the baseline of more than nine years before the 2012 law, but still too slow2.

The proposal names delays in emerging technologies such as artificial intelligence, cybersecurity and green tech as a key problem2. The Q&A says the EU increasingly cannot rely on standards for new strategic technologies such as AI, cyber and batteries, while other economies move faster3. The Commission expects the reform to cut the average time to develop a standard from six years to four1.

What changes for standards development under COM(2026) 780?

The proposal keeps the current system, built around three European standardisation organisations: CEN, which covers most sectors, CENELEC for electrical products, and ETSI for telecoms and IT3. It adds several new tools to speed up their work:

  • binding deadlines for standards the Commission requests3
  • clearer use of common specifications, a fallback when no harmonised standard exists2
  • faster uptake of good existing specifications from outside bodies, under set conditions3
  • temporary presumption of conformity for some interim technical documents3
  • key performance indicators and real-time monitoring on a digital platform3

Current law and the proposal

QuestionRegulation 1025/2012COM(2026) 780
Who writes requested standardsCEN, CENELEC and ETSIAlso other designated bodies
Access to harmonised standardsPartly soldFree to read
Average development time6 years4 years targeted

The interim documents matter most for companies with new products. They would let innovative solutions reach the market while full standards are still being written1.

The biggest structural change concerns who writes the standards. After consulting the three European bodies, the Commission could send requests to other designated standards organisations when needs are urgent or highly specialised3. The Q&A says this would happen under strict safeguards and with the approval of EU member states3.

Will EU harmonised standards become free?

Yes, under the proposal. Rulings by the Court of Justice of the EU found that standards referenced in EU legislation are part of EU law and must be freely available3. The proposal would write this into law, so that harmonised standards and standards referenced in EU law can be read for free3.

The Commission plans dedicated online repositories to hold them1. About 3,650 standards would be covered, out of 27,000 in the catalogues of the European standardisation organisations3.

This creates a money problem for some standards bodies. CEN and CENELEC partly rely on selling harmonised standards, while ETSI already gives its standards away for free2. The Commission says harmonised standards are only a small part of these bodies’ revenues, and that digital services could create new income3.

How will small businesses gain from the standards reform?

The proposal strengthens the duties of European and national standards bodies to include small and medium-sized enterprises (SMEs), civil society, academia and public authorities1. It also adds transparency and accountability requirements for those bodies1.

What standards bodies must do

Include SMEs and civil society Also academia and public authorities
Reduce participation costs for SMEs A duty on national standards bodies
Meet transparency requirements With new accountability rules

National standardisation bodies would have to reduce participation costs for SMEs3. The evaluation found that the system is held back by too little participation from SMEs and other groups, particularly in emerging technologies2.

For a smaller manufacturer, the practical gains are threefold. Standards would be quicker to arrive, free to consult, and easier to influence. The Q&A says faster standards would also mean products can claim conformity with EU law sooner, which cuts compliance costs3.

What does the proposal mean for international standards?

Many European standards come from, or align with, global ones set by ISO, IEC and ITU3. The proposal would strengthen EU coordination inside those international bodies, in line with World Trade Organization principles1.

It would also allow the EU, in work supporting its own laws, to restrict participation to actors from the Union or to depart from international standards2. The Commission says this codifies existing practice and protects economic security without abandoning the principle that European standards first seek to align with international ones2.

A new Expert Centre on European Standardisation would provide strategic steering and align standards work with EU priorities1.

How did stakeholders shape the standardisation proposal?

A call for evidence ran from 23 June to 21 July 2025 and drew 198 valid contributions2. An open public consultation from 24 September to 17 December 2025 drew 599 valid replies from 32 countries2.

Industry and SMEs backed faster tools, such as temporary presumption of conformity2. Standards bodies opposed publishing standards in the Official Journal, warning it would threaten their revenue2. All stakeholder groups rejected a full overhaul that would let any standards organisation receive EU requests2. The Commission kept the three European bodies at the centre but added the option of other designated organisations2.

When would the new standardisation rules apply?

Nothing changes yet for companies. The European Parliament and the Council must now examine the proposal before it can be adopted and enter into force1.

The Q&A says the length of any transition period will be set in the final legal act3. Until then, Regulation (EU) No 1025/2012 remains the law, and the next milestone is the Parliament and Council negotiation on the file, procedure number 2026/0307 (COD)2.

Sources

  1. ↩ Commission adopts proposal to accelerate standards development and improve EU competitiveness https://ec.europa.eu/commission/presscorner/detail/en/ip_26_2070
  2. ↩ f61c3dca-d763-4d6d-b907-e17756e5c5b6_en https://single-market-economy.ec.europa.eu/document/download/f61c3dca-d763-4d6d-b907-e17756e5c5b6_en?filename=COM_2026_780_1_EN_ACT_part1_v6.pdf
  3. ↩ Questions and answers on the new Standardisation Regulation https://ec.europa.eu/commission/presscorner/detail/en/qanda_26_2071

You may also like